Laminating and Stacking Machine
When looking for a good laminating and stacking machine, it is important to find a machine that is easy to maintain. This is because these machines often have to be cleaned and maintained in order to ensure that they work properly. A good machine will have a lubrication system that keeps the parts free from grease and dust. It is also important to make sure that the machine is cleaned and dried thoroughly after each use.
YB-1450HS high speed laminating and stacking machine
A high speed laminating and stacking machine is a piece of equipment that combines the laminating process with the stacking of sheets. The machine uses heat and pressure to produce a finished laminated product. It is designed to laminate paper, cardboard, and corrugated material.
It has a feed table that holds a stack of paper within reach of the laminating system’s nip rollers. In addition, it features a bursting unit that pulls sheets apart as they exit the laminator.
It also has an automatic blade separator that cuts film between sheets. It features a guillotine knife that is strong enough to cut double-sided laminates.
This machine can laminate up to 100 sheets of paper at a time. Besides, it is equipped with a non-stop belt feeder that keeps the laminating process running smoothly.
Its modern control panel uses touchscreen technology. These machines allow for simple operation, and the user interface is intuitive and easy to use.
This high speed laminating and stacking machine can produce over 30,000 cards an hour. It is suitable for use in print shops, copy/print shops, and other businesses that handle a variety of stocks.
A Lamina FASLINE+ is a fully automatic, heavy duty, high speed sheet-to-sheet laminating/mounting machine. It can perform a wide range of operations and it is equipped with a heavy duty vacuum system.
Besides, it can be customized to handle different paper widths. It is also equipped with a double gap device, which shortens the stacking time and maximizes production efficiency. Moreover, it features a servo-controlled, non-stop belt feeder.
It is also equipped with a nip and pull roller adjustment device. This device allows for easy, precise adjustment of the nip and pull rollers.
Several models of high speed laminating and stacking machines are available. Youbond is a professional manufacturer of these machines. They offer several models that are able to laminate cardboard, printed sheet, and corrugated. Their products are designed Laminating and stacking machine for the printing industry, and they also sell custom-made machines.
Whether you are looking for a high speed laminating and stacking machine, or you are in the market for a new laminator, Youbond can help you make your decision.
Lamina FASLINE+ full sheet laminator
If you’re looking for a high performance sheet to sheet laminating and stacking machine, look no further than the Lamina FASLINE+. Designed to perform a plethora of tasks, the FASLINE+ is equipped with a vacuum system, a heavy duty vacuum, and a servo controlled non-stop belt feeder. The FASLINE+ has also been designed to make loading pallets directly into the unit a breeze.
Aside from the obvious, the FASLINE+ also boasts a number of innovations. For example, it features an automatic glue dispenser that automatically controls the level of glue, a vacuum system, and a top loading tray for loading and unloading large amounts of laminating film. In addition, it has a dual temp control that maintains the proper temperatures throughout the process. This allows it to handle materials that range from 0.6 to 10 mm thick.
There are a number of options available to upgrade the FASLINE to meet your specific requirements. These include the Flip-Flop, Pressure Belt, and Automatic Stacker. It also comes equipped with the aforementioned PLC control system, a large display monitor, and a visual alarm. Lastly, it is a compact machine that is easy to maneuver.
The best part about the Lamina FASLINE+ is its low maintenance and high output. It is equipped with an air tight vacuum system, which helps it to reduce the number of stops it makes during the laminating process. And the FASLINE+ also features a top loading tray that increases its loading capacity. Moreover, it comes with an integrated glue dispenser, which is connected to its glue container, making it easy to clean.
Other features include a dual temp control, a number of sensors, and a servo controlled non-stop feeder. With all these, the FASLINE+ is sure to be a keeper. You’ll be amazed at how much you can achieve in a short period of time. From stacking finished laminated pieces to producing a swanky-looking presentation piece, the FASLINE+ has you covered. Whether you’re a small business or a large corporation, the FASLINE+ is a great investment for your money.
Lamina FASLINE+ with negative pole
This machine is designed for positive and negative laminating. It is equipped with a servo-controlled non-stop belt feeder, a high-capacity rear edge top feeder, and a heavy duty vacuum system. Compared to other machines, it has a small footprint and high output. In addition, it has a long life span.
The device is mainly used to Laminating and stacking machine stack lithium battery positive and negative electrodes. However, it can also be used for other materials like paper and plastic. Another nifty feature is that it is able to do a positive and negative desuperposition.
The best part is that the device is very easy to operate. You can load your pallets directly into the unit and start the machine. Moreover, it is also a one operator machine. And it also demonstrates a low maintenance cost. Aside from the fact that it is capable of handling large sheets, it can be upgraded with a Flip-Flop unit, which increases the capacity of the unit by a factor of two.
The best part is that the device can perform a variety of functions, ranging from manual loading to automatic stacking. To achieve this feat, it is equipped with a rotary servomotor and a positive-negative conveying servomotor on the stander. These functions are controlled by a controller and a touch screen monitor.
The device also combines a ring-type load-transfer device enclosed within two transmission shafts. One ring is driven by a motor and the other is forced to lead by a constant tension mechanism.
What’s more, the ring-type load-transfer device can be easily cleaned. The apparatus also has an automatic glue dispenser and a glue container that is connected to it.
The laminating and stacking machine FASLINE+ is not only a well-crafted machine, but it is also very simple to use. The equipment is a good choice for manufacturers who want to produce high quality laminations in small batches. Despite its compact design, it is able to produce a wide range of sheet sizes from 0.6 mm to 10 mm.
Other benefits include a coiled lithium battery that is convenient for cutting. Furthermore, it has a very good pass rate and low internal resistance, which means that it can be used for many applications.
Laminating and stacking machine deformation
Stacking and deformation of laminated products occur due to several factors. One of these is moisture content variation. Another is pressing. Finally, the powder dropping is prone to occur at the bending place. This is particularly troublesome in the production of LVPs. In order to solve these problems, we developed a new methodology for energy absorption of composite laminates. It can be used to achieve high precision shape control and deformation. The system consists of a series of PZT actuators, which can be distributed at appropriate positions and activated to perform deformation.
For the testing of stress-and-deformation behaviours of composite laminates, a path-controlled load application was carried out using a Zwick/Roell 150kN tensile and compression testing machine. Each test specimen consisted of a rectangular interlayer with a length of 200mm x 550mm. At the plane of 180deg, the stacked samples were bent to 127deg and 111deg. These were then compared to the original test sample to determine the degree of distortion. The results showed that the stacked samples were subjected to large bending deformation.
In addition to stress-and-deformation behaviours, the impact behaviour of composite laminates was studied. It was found that the impact behaviour of composite laminates can be divided into three stages. Firstly, the laminates are subjected to low velocity impact load. Secondly, the delamination extent of the composite laminates is measured. Thirdly, the effect of the sequence and thickness of the composite laminates on the impact behaviour of the laminates is investigated. As a result, we can predict the deformed shape of the composite laminate with a simple method.
Furthermore, a new approach is presented to study the effects of deformation on the transfer process of a composite laminate. The results demonstrate that the shape of the composite laminate can be controlled by distributing PZT actuators in appropriate locations. Consequently, the defect rate and the efficiency of stacking and cutting can be improved. We also propose a new design for the stacking machine.